The FL-101 is Vexta's 3 m black-anodised aluminium fixed vertical wall ladder. Side rails and non-slip rungs are extruded in EN AW-6061 T6, held 150 mm off the wall by four dark-powder-coated steel stand-off brackets, and supplied pre-assembled for direct fixing to masonry, concrete or profiled cladding. It is designed for permanent, controlled access to mezzanines, rooftop plant and low maintenance platforms.
Technical Data
Model: FL-101
Product Code: LD-FL-101
Overall Length: 3.0 m
Number of Rungs: 10
Rung Pitch: 280 mm
Rung Diameter: Ø30 mm knurled aluminium
Side Rail Section: 60 x 25 mm rectangular, 2.5 mm wall
Inner Width: 400 mm
Wall Clearance: 150 mm
Stand-off Brackets: 4 x powder-coated steel
Base Plate: 150 x 80 x 5 mm steel
Max Working Height: 3.6 m
Load Rating: 150 kg (single user)
Net Weight: 6.8 kg
Material: EN AW-6061 T6 aluminium, black anodised
Bracket Finish: dark-gray powder-coated S235 steel
Standard: EN 14122-2, EN 14122-4
Installation: rawl bolts / chemical anchors per substrate
Key Features
3 m single-section fixed vertical wall ladder, pre-assembled
Black-anodised EN AW-6061 T6 aluminium side rails and rungs
Ø30 mm knurled non-slip aluminium rungs at 280 mm pitch
Four dark powder-coated steel stand-off brackets, 150 mm wall clearance
Fixing hardware included for concrete, blockwork and profiled cladding
Corrosion-proof, suitable for coastal and industrial vapour environments
Top landing plate and optional anti-slip rung sleeves available
Supplied with installation drawing, batch certificate and 5-year warranty
Applications
Mezzanine and upper-floor external access
Rooftop HVAC, fan and ventilation equipment servicing
Wall-mounted electrical and control cabinet maintenance
Small storage tank and silo inspection points
Water-treatment and pumping-station access
Warehouse attic and roof-hatched entry points
Product Advantages
Lightweight one-piece unit, fast two-person installation
Black-anodised aluminium resists corrosion and coastal salt air
150 mm stand-off gives comfortable, code-compliant foot clearance
Pre-assembled, no on-site drilling of rungs or rails
Modular brackets allow alignment on uneven masonry
Vexta 5-year structural warranty and batch certificate
Material & Specifications
Side rails: EN AW-6061 T6 aluminium extrusion, black anodised
Rungs: EN AW-6061 T6 aluminium tube, Ø30 mm, knurled grip
Stand-off brackets: S235 mild steel, dark-gray powder-coated
Base plate: 5 mm S235 steel, powder-coated
Fixings: M10 galvanized steel bolts, washers and nuts
Welds: TIG aluminium welds, brushed flush
Fasteners: stainless A2-70 where exposed
Model | FL-101 | FL-102 | FL-103 |
Product Code | LD-FL-101 | LD-FL-102 | LD-FL-103 |
Overall Length | 3.0 m | 4.0 m | 5.0 m |
Number of Rungs | 10 | 14 | 18 |
Rung Pitch | 280 mm | 280 mm | 280 mm |
Rung Diameter | Ø30 mm knurled aluminium | Ø30 mm knurled aluminium | Ø30 mm knurled aluminium |
Side Rail Section | 60 x 25 mm rectangular, 2.5 mm wall | 60 x 25 mm rectangular, 2.5 mm wall | 70 x 25 mm rectangular, 3.0 mm wall |
Inner Width | 400 mm | 400 mm | 400 mm |
Wall Clearance | 150 mm | 150 mm | 150 mm |
Stand-off Brackets | 4 x powder-coated steel | 5 x powder-coated steel | 6 x powder-coated steel |
Base Plate | 150 x 80 x 5 mm steel | 150 x 80 x 5 mm steel | — |
Max Working Height | 3.6 m | 4.6 m | 5.6 m |
Load Rating | 150 kg (single user) | 150 kg (single user) | 150 kg (single user) |
Net Weight | 6.8 kg | 8.6 kg | 12.4 kg |
Material | EN AW-6061 T6 aluminium, black anodised | EN AW-6061 T6 aluminium, black anodised | EN AW-6061 T6 aluminium, black anodised |
Bracket Finish | dark-gray powder-coated S235 steel | dark-gray powder-coated S235 steel | dark-gray powder-coated S235 steel |
Standard | EN 14122-2, EN 14122-4 | EN 14122-2, EN 14122-4 | EN 14122-2, EN 14122-4 |
Installation | rawl bolts / chemical anchors per substrate | rawl bolts / chemical anchors per substrate | rawl bolts / chemical anchors per substrate |