The FL-103 is Vexta's 5 m black-anodised aluminium fixed vertical wall ladder. With six stand-off brackets, a reinforced 3.0 mm rail section and a welded top handrail, it provides permanent outdoor access to mid-height roofs, silo skirts and processing-tank tops where a stair would waste floor space.
Technical Data
Model: FL-103
Product Code: LD-FL-103
Overall Length: 5.0 m
Number of Rungs: 18
Rung Pitch: 280 mm
Rung Diameter: Ø30 mm knurled aluminium
Side Rail Section: 70 x 25 mm rectangular, 3.0 mm wall
Inner Width: 400 mm
Wall Clearance: 150 mm
Stand-off Brackets: 6 x powder-coated steel
Top Handrail: 1.0 m high, welded
Max Working Height: 5.6 m
Load Rating: 150 kg (single user)
Net Weight: 12.4 kg
Material: EN AW-6061 T6 aluminium, black anodised
Bracket Finish: dark-gray powder-coated S235 steel
Standard: EN 14122-2, EN 14122-4
Installation: rawl bolts / chemical anchors per substrate
Key Features
5 m single-section fixed vertical wall ladder, pre-assembled
Reinforced 3.0 mm black-anodised EN AW-6061 T6 side rails
Six stand-off brackets for wind and vibration control
Welded 1 m top handrail for safe three-point roof step-off
Inner climbing width 400 mm, harness and tool-belt friendly
Optional bottom lockable hatch cover for restricted access
Hot-dip galvanised steel variant for aggressive atmospheres
Supplied with stainless fixings, calc sheet and batch certificate
Applications
Mid-height industrial roof and set-down access
Silo skirts and processing-tank top maintenance
Water-treatment and pumping-station exterior access
Food and pharma plant outside-wall equipment reach
Containerised pump-house and generator access
Paper-mill and warehouse roof-edge service ladders
Product Advantages
Reinforced rail section controls sway at 5 m height
Top handrail keeps three points of contact at step-off
Lockable bottom hatch option for restricted-access sites
Matte black finish blends into dark factory cladding
Permanent fix removes daily portable-ladder handling
Vexta structural calc sheet and 5-year warranty
Material & Specifications
Side rails: EN AW-6061 T6 aluminium extrusion, 3.0 mm wall, black anodised
Rungs: EN AW-6061 T6 aluminium tube, Ø30 mm, knurled grip
Stand-off brackets: S235 mild steel, dark-gray powder-coated
Top handrail: EN AW-6061 T6 tube, welded to rails
Base and top plates: 6 mm S235 steel, powder-coated
Fixings: M10 A2-70 stainless steel bolts and nuts
Welds: TIG aluminium welds, brushed flush
Model | FL-103 | FL-101 | FL-102 |
Product Code | LD-FL-103 | LD-FL-101 | LD-FL-102 |
Overall Length | 5.0 m | 3.0 m | 4.0 m |
Number of Rungs | 18 | 10 | 14 |
Rung Pitch | 280 mm | 280 mm | 280 mm |
Rung Diameter | Ø30 mm knurled aluminium | Ø30 mm knurled aluminium | Ø30 mm knurled aluminium |
Side Rail Section | 70 x 25 mm rectangular, 3.0 mm wall | 60 x 25 mm rectangular, 2.5 mm wall | 60 x 25 mm rectangular, 2.5 mm wall |
Inner Width | 400 mm | 400 mm | 400 mm |
Wall Clearance | 150 mm | 150 mm | 150 mm |
Stand-off Brackets | 6 x powder-coated steel | 4 x powder-coated steel | 5 x powder-coated steel |
Max Working Height | 5.6 m | 3.6 m | 4.6 m |
Load Rating | 150 kg (single user) | 150 kg (single user) | 150 kg (single user) |
Net Weight | 12.4 kg | 6.8 kg | 8.6 kg |
Material | EN AW-6061 T6 aluminium, black anodised | EN AW-6061 T6 aluminium, black anodised | EN AW-6061 T6 aluminium, black anodised |
Bracket Finish | dark-gray powder-coated S235 steel | dark-gray powder-coated S235 steel | dark-gray powder-coated S235 steel |
Standard | EN 14122-2, EN 14122-4 | EN 14122-2, EN 14122-4 | EN 14122-2, EN 14122-4 |
Installation | rawl bolts / chemical anchors per substrate | rawl bolts / chemical anchors per substrate | rawl bolts / chemical anchors per substrate |
Base Plate | — | 150 x 80 x 5 mm steel | 150 x 80 x 5 mm steel |